Honda GX390 13HP 1 Inch Keyway Shaft Engine Electric Start (QXER)

Electric Start. Output Shaft: 1 Inch Keyway Shaft (QXER)

The GX390 is the largest of the GX Single Cylinder Range and features power, performance, low fuel consumption, and low emissions into an all-round quality engine. As the largest of Honda's flagship GX range of engines, the GX390 is used in all sorts of applications. From Pressure Washers and Commercial/Industrial equipment, to Tillers/Cultivators, Generators and Commercial Lawn & Garden Equipment, it can be found working hard all over Australia. Due to its power and emissions compliance, heavy-duty Forestry Equipment, Agricultural Equipment and Water Pumps are also powered by the gutsy GX390. A digital CDI ignition system with variable timing and an increased compression ratio combines with the GX390's Precision Camshaft design to offer precise valve timing and optimal valve overlap for better fuel efficiency. Helical cut gears, a large capacity, multi-chamber exhaust system and sophisticated air intake system also makes for an exceptionally quiet engine. And with Oil Alert, a simple Throttle Control, Large Fuel Tank and Automotive Type Fuel Cap, Dual Oil Drains and Fills, an easily accessible Spark Plug and Heavy Duty Recoil Starter, the GX390's features go on and on. Just like the entire GX engine range, the GX390 is covered by an extensive Honda 3 Year Warranty.

Model: GX390
Type: 4-Stroke, overhead valve, single-cylinder, horizontal shaft
Bore & Stroke: 88 x 64 mm
Displacement: 389 cm3
Compression Ratio: 8.0:1
Net Power: 8.2kw ( 11.0HP ) at 3,600rpm
Maximum Net Torque: 25.1 Nm at 2,500 rpm
Ignition System: Transistorised Magneto Ignition
Starting System: Electric Start & Manual Backup
Cooling System: Forced-air
PTO Shaft Rotation: Counter-clockwise (from P.T.O. side)
Fuel Consumption At Rated Power: 3.7 L/h at 3,600 rpm
Recommended Fuel: Unleaded
Lubrication System: Splash
Recommended Oil: 10W/30 API SG
Oil Capacity: 1.1l
Fuel Tank Capacity: 6.1l
Dimensions: 405mm x 450mm x 443mm
Dry Weight: 33.5kg
Model: GX390
Type: 4-Stroke, overhead valve, single-cylinder, horizontal shaft
Bore & Stroke: 88 x 64 mm
Displacement: 389 cm3
Compression Ratio: 8.0:1
Net Power: 8.2kw ( 11.0HP ) at 3,600rpm
Maximum Net Torque: 25.1 Nm at 2,500 rpm
Ignition System: Transistorised Magneto Ignition
Starting System: Recoil
Cooling System: Forced-air
PTO Shaft Rotation: Counter-clockwise (from P.T.O. side)
Fuel Consumption At Rated Power: 3.7 L/h at 3,600 rpm
Recommended Fuel: Unleaded
Lubrication System: Splash
Recommended Oil: 10W/30 API SG
Oil Capacity: 1.1l
Fuel Tank Capacity: 6.1l
Dimensions: 405mm x 450mm x 443mm
Dry Weight: 31kg

Delivery

Melbourne Power Equipment endeavours to dispatch your order as soon as possible, however this may take up to 2 business days.

Our freight suppliers will deliver to a business or residential address, to a ground floor only.

Deliveries will be Monday to Friday 8:30am to 5:00pm. Deliveries are not available after business hours, weekends or public holidays.

Please be home on the day your order is due to be delivered. If you are not at the delivery address on the day due for delivery, you will be notified that a delivery has been attempted, and you will have the choice to pick up from the freight depot, or a re-delivery can be arranged for an extra cost. Melbourne Power Equipment is not liable for any cost relating to re-delivery as a result of the recipient not being at the delivery address on the delivery due date.

Our freight suppliers do not deliver to PO Box addresses.

Estimated delivery times once Despatched:

1-2 Days VIC
2-3 Days NSW, ACT & SA
3-5 Days QLD & TAS
5-7 Days WA
7-10 Days NT
Please allow more time for orders sent to remote areas, or large items being sent out.

If your order has not been received in the specified time, please contact us on either [email protected] or 03 9376 4333.